Contact

EOL - End of Line

EOL -End of Line- Testing for AC, BLDC, DC Brush Motors

Nowadays electric motors are subject to 100% inspection following manufacturing.

The M.E.A. Inertial Dynamometer gives the ultimate solution where the conventional dynamometer cannot, since the usage of the conventional dynamometer is often impracticable due to time constraints, cost, and complex setups.

Inertial Dynamometer devices are the ideal testing solution for every type of electrical motor, providing real measurements of the motor output without the usage of modeling. Due to the very fast testing cycle (less than 5 sec) and accuracy of M.E.A. Inertial Dynamometer devices, we have developed our MotorLine systems to meet the demands of testing 100% of the motors on the assembly/production line.

Whether it’s manual or fully automatic, each M.E.A. Inertial Dynamometer device for assembly/production line is a customized solution adapted to the customer’s full-needs.

The supported range of motors is almost unlimited (torque range is unlimited, speed range 5-60,000 rpm).

M.E.A. Inertial Dynamometer devices for the production line can be manual or fully automatic.

         

Fully automatic Line                        Manual line

M.E.A. turnkey customized systems include:

  • Full conventional motor performance test, from starting to no-load speed
  • High Voltage Test
  • Insulation Test
  • Protective Wire Test
  • Vibration and Noise level

M.E.A. Inertial Dynamometers support the following AC motor types:

  • Single Phase Induction
  • Capacitor
  • Shaded Pole
  • Single Phase Outer Rotor
  • Three Phase Induction
  • Three Phase Outer Rotor
  • Universal

Удобство подхода

  • Размер шрифта

Легенда доступности

Для полной совместимости используйте браузеры Chrome и Firefox.
Чтобы переключаться между элементами на странице, нажмите клавишу Tab, чтобы вернуться назад, нажмите клавишу Shift + Tab                 

В этом инструменте специальных возможностей можно сделать несколько вещей                     

                            
  • - заменить цвет сайта в отделе цвета                         
  • - Увеличение и уменьшение шрифтов без разрывов дизайна                         
  • - подчеркивать заголовки и ссылки в схеме                         
  • - Вы также можете работать только на клавиатуре и просматривать сайт                         
  • - вы можете воспроизводить документ без форматирования                         
  • - все можно сбросить до значения по умолчанию                      
                     

Основные места легко доступны с помощью вышеуказанных сочетаний клавиш                      

                             
  • ESC сбрасывает индекс документа и помещает его в меню быстрой навигации                          
  • ALT + i - выключите и включите эту информацию                          
  • ALT + m - быстрый доступ к меню специальных возможностей                          
  • ALT + s - перейдите в меню быстрой навигации                          
  • ALT + 1 - Вернуться на главную страницу                          
  • ALT + 2 - перейти в главное меню                          
  • ALT + 3 - Перейти к основному содержанию на странице                          
  • ALT + 4 - вне общего поиска                          
  • ALT + 5 - перейти на страницу контактов                      
             

Если страницы перемещаются по сайту, информация о нашем выборе сохраняется и переходит к пользователю на следующую страницу