联系我们

Servo Motors

A Servo Motor is a closed-loop servomechanism that uses position feedback (like encoder) to control its motion and final position. The input to its control is a signal (either analogue or digital) representing the position commanded for the output shaft.

Servo Motors are used in radio-controlled airplanes to position control surfaces like elevators, rudders, walking a robot, or operating grippers.

Servo Motor advantages:

  • Excel at position and speed control.
  • High output power relative to motorsize and weight.
  • Encoder determines accuracy and resolution.
  • High efficiency. It can approach 90% at light loads.
  • High torque to inertia ratio. Servo Motors can rapidly accelerate loads.
  • Servo motors achieve high speed at high torque values.
  • Quiet at high speeds.

Servo Motor disadvantages:

  • Requires tuning to stabilize the feedback loop.
  • Will become unpredictable when something breaks, so safety circuits are required.
  • Complex controller requires encoder and electronic support.
  • Peak torque is limited to a 1% duty cycle. Servo Motors can be damaged by sustained overload.
  • Gear boxes are often required to deliver power at higher speeds.
  • Higher overall system cost and the installation cost of a Servo Motor system may be higher than that of a stepper motor due to the requirement for feedback components.

 

 

Servo motor testing Features:

Selected Capabilities:

  • The MEA regenerative Dynamometer System (MEA RDS) enables:
    • Complete load performance testing: Torque, Speed, Current, Efficiency, Power Input, Power Output.
    • Standard electrical parameters testing: HV, Vibration, Noise, and others.
    • Additional testing: Cogging, Back EMF, Friction, Friction Spectrum, Ripple Torque.
    • Automatic temperature rise test: Thermocouple device with 4 to 16 channels, Current, Voltage, Speed, Torque, Input Power, Output Power, all synchronized to each temperature.
    • Electrical Motorcycle Motor Drive Cycle Load Simulation: Real-time simulation of scooter/driver, with acceleration, brake, change of vehicle states.
    • Battery Simulation: Battery cycle testing (Charge/Discharge), Battery SOC (State Of Charge) script and Battery SOD (State Of Discharge) script, during advanced battery simulation and simple battery simulation; Special feature: Low voltage dip at current transient; System includes Output Filter with high capacitance; Testing at U mode: Voltage Control (CV).
    • Battery Testing: I+ mode: Current Control (CC+); I- mode: Current Control (CC-); P mode: Power Control (CP), CC-CV, Step for cut-off condition (ET, EV, EC, CC time, CV time, Cap%, etc..), Protection (OV & LV, OC & LC, OT).
    • Additional EM Tests: Performance Generating Mode & Performance Motoring Mode, Stall Torque, Cogging Torque, Back EMF RMS, Open Circuit Back EMF, Back EMF Constant KE, No Load Coupled & Uncoupled, Torque Ripple Measurements at Low RPM & at High RPM, Electromechanical Time Constant, Voltage and Current Harmonics, Load from Excel File, Speed Torque Scope Viewer, Deceleration Test (MOI Calculation), Servo Bandwidth (Speed Loop & Current Loop), Dynamic Testing during acceleration and deceleration, Friction vs. Speed & Friction Drag Torque, Torque Speed FFT, Performance at Variable Voltage, Inductance Test 3 Phases, Vibration; ISG Tests: Generation Characteristic; ISO Efficiency Tests: ISO Efficiency and ISO Efficiency Contour, S1 to S8 – IEC duty cycles of operation for electrical motors.

Accessibility

  • Font size

Accessibility Legend

For full compatibility, use Chrome and Firefox browsers.                 

In this accessibility tool, several things can be done

                
                        
  • - Replace website color in the color department
  •                     
  • - Increase and decrease fonts without design breaks
  •                     
  • - Emphasize headlines and links in the outline
  •                     
  • - You can also only work on a keyboard and browse the site
  •                     
  • - You can play a document without any formatting
  •                     
  • - Everything can be reset to the default
  •                 
                

Main places can be easily reached by the above key combinations

                
                        
  • ESC resets the index of the document and places it in the Quick Navigation menu
  •                     
  • ALT + i - Turn off and turn on this information
  •                     
  • ALT + m - Quick access to the accessibility menu
  •                     
  • ALT + s - Go to the Quick Navigation menu
  •                     
  • ALT + 1 - Back to home page
  •                     
  • ALT + 2 - go to the main menu
  •                     
  • ALT + 3 - Go to main content on page
  •                     
  • ALT + 4 - beyond general search
  •                     
  • ALT + 5 - go to the contact page
  •                 
                

If pages are moved through the site information about our choices is saved and continues with the user to the next page