문의하기

Starter & Actuator

Testing Starters & Actuators

STS-101 Series – Torque: Max 100 Nm; Speed range: 0-42000 rpm; Flywheel speed: Max 4200 rpm; Output power: Max 3 kW; Input current: Max 1500 A; Voltage ranges: 0-12 V/0-24 V

STS-102 Series – Torque: Max 270 Nm; Speed range: 0-32000 rpm; Flywheel speed: Max 3200 rpm; Output power: Max 7 kW; Input current: Max 2500 A; Voltage ranges: 0-12 V/0-24 V/0-32 V

STS-103 Series – Torque: Max 350 Nm; Speed range: 0-32000 rpm; Flywheel speed: Max 3200 rpm; Output power: Max 12 kW; Input current: Max 3500 A; Voltage ranges: 0-12 V/0-24 V/0-32 V

 

 

Features and Benefits:

Starter:

  • Complete load performance: torque, speed, current, voltage, input power, output power, time, motor efficiency.
  • Battery Load Simulation – Power supply with programmable voltage, resistance, and current.
  • Testing of a wide range of starters, according to the different model chosen.


Solenoid for Starters:

  • Solenoid Pull-in & Hold-in coil resistance, current, contact voltage drop.
  • “Mechanical defect” testing, such as Solenoid over traveling, Weak spring (Contact Spring force and Return force), Contact switch time.


Endurance Testing:

  • Solenoid and Starter endurance testing of up to 8 starters in one system.
  • Starter temperature (°C).
  • Temperature condition simulation.


EOL Testing:

  • Starter full load performance, without coupling to any external load (mathematical modeling giving complete load data torque, speed, current, voltage, input power, output power, time, motor efficiency), from stall up to no-load.
  • Evaluation of starter motor wear characteristics, such as mechanical & electrical faults.
  • Transient testing with mechanical and dynamic torque testing.
  • Can be operated in automatic mode, for fully automatic testing, or in manual mode.

 

The Starting System:
The starting system converts electrical energy from the batteries into mechanical energy to turn the engine over. A malfunction within the starting system will make it difficult to get the engine running. The starter motor is a small but powerful electric motor that delivers a high degree of power for a short period of time. Therefore a dynamic test during starter acceleration and deceleration periods are highly recommended for defect detection.

MEA EOL systems test the starter load performance during the acceleration period. Since the test is done during the acceleration period, the static and dynamic data measured shows the exact starter working behavior, being the best way for defect detection. In addition, if requested, the MEA EOL can be connected to a physical load. During the tests, the system uses a power supply with programmable voltage, resistance, and current, performing battery load simulation.

The starter solenoid is an electromagnetic switch mounted on the starter motor. When coils inside the solenoid are energized by electricity, they create a magnetic field that attracts and pulls a plunger, activating the starter motor.

MEA EOL systems measure the solenoid pull-in & hold-in coil resistance, current, and contact voltage drop. In addition, the systems test for “mechanical defects”, such as solenoid over traveling, weak spring (contact spring force and return force), and the contact switch time.

MEA systems are good for a large variety of starters, with output power from 0.3 kW up to 12 kW.

Accessibility

  • Font size

Accessibility Legend

For full compatibility, use Chrome and Firefox browsers.                 

In this accessibility tool, several things can be done

                
                        
  • - Replace website color in the color department
  •                     
  • - Increase and decrease fonts without design breaks
  •                     
  • - Emphasize headlines and links in the outline
  •                     
  • - You can also only work on a keyboard and browse the site
  •                     
  • - You can play a document without any formatting
  •                     
  • - Everything can be reset to the default
  •                 
                

Main places can be easily reached by the above key combinations

                
                        
  • ESC resets the index of the document and places it in the Quick Navigation menu
  •                     
  • ALT + i - Turn off and turn on this information
  •                     
  • ALT + m - Quick access to the accessibility menu
  •                     
  • ALT + s - Go to the Quick Navigation menu
  •                     
  • ALT + 1 - Back to home page
  •                     
  • ALT + 2 - go to the main menu
  •                     
  • ALT + 3 - Go to main content on page
  •                     
  • ALT + 4 - beyond general search
  •                     
  • ALT + 5 - go to the contact page
  •                 
                

If pages are moved through the site information about our choices is saved and continues with the user to the next page